如下為我司愛澤工業IZE_Industries本月部分到貨COSMO相關產品，歡迎致電索取樣本資料和產品信息。
COSMO漏孔LM-1C -89kpa 0.20ml/min COSMO漏孔LM-1C -89kpa 0.20ml/min
COSMO漏孔LM-1C 800kpa 1.32ml/min COSMO漏孔LM-1C 250kpa 0.20ml/min
COSMO漏孔LM-1C -89kpa 1.00ml/min COSMO漏孔LM-1C-J1-1
COSMO漏孔LM-1C / LM-1C-J1系列介紹
● 在的測試壓力下創建的泄漏量
● 制造精度在要求泄漏量的5%以內。 但小于2mL/min時，制造精度應為±10～20%。
● 漏氣測試儀的靈敏度檢查，運行方便可靠。
● 泄漏量變化小，可長期穩定使用
● 也可用于外部壓力檢測（二次測量）法
● 可直接連接到漏氣測試儀校準端口
● 通過使用專用適配器，可以在從工件到測試儀進行配管時進行連接
● 通過將泄漏管理器更換為專用堵頭，可以輕松恢復正常檢查狀態（無泄漏狀態）
● 可應要求提供可追溯
● Create the specified leak amount at the specified test pressure
● Manufacturing precision within 5% of the requested leak volume. However, for less than 2mL/min, manufacturing precision should be ±10～20%.
● Easily and reliably run a sensitivity check of air leak tester.
● The change in leak volume is small, so it can be used stably over the long term
● Can also be used for external pressure detection (secondary side measurement) method
● Can be directly connected to our air leak tester calibration port
● By using dedicated adapter, connection is possible when doing piping from workpiece to tester
● By changing the leak master to a dedicated plug, it is possible to easily return to normal inspection status (no leak status)
● Traceability certificate is available upon a request
COSMO漏孔LM-1C / LM-1C-J1系列壓力流量選型
COSMO漏孔LM-1C / LM-1C-J1系列其他常用型號：
COSMO LM-1C
COSMO LM-1C-J1-1
COSMO LM-1C-J1-2
COSMO LM-1C-J1-5
COSMO LM-1C-J1-10
COSMO LM-1C-J1-20
COSMO LM-1C-J1-50
COSMO LM-1C-J1-100
COSMO LM-1C-J1-200
如果您有任何關于產品的相關技術咨詢或者需要COSMO的相關技術資料與文檔，請隨時致電愛澤工業（021-3100 6702），或者訪問網站www.ize-industries.com,我們將盡全力解決您的問題。
If you have any question for COSMO，
please feel free to dial 0086-21-3100 6702 or browse our website: www.ize-industries.com.
IZE-industries
Contact Information：
Tel：0086-21-31006702 or 0086-21-35350722
Fax：0086-21-35350711
Mobile：0086-189 1750 1433
E-mail：sales@ize-industries.com
Website：www.ize-industries.com