西門子工業以太網線Profinet總線電纜4芯
    發布者:kangkui  發布時間:2021-12-07 11:19:31  訪問次數:118

    西門子工業以太網線Profinet總線電纜4芯

    西門子代理商大量庫存 現貨 

    西門子代理商現貨供應 

    原裝正品  質保一年

    上海斌勤電氣技術有限公司

    發布人:康奎 (銷售經理)發布

    本公司簽約正式的銷售合同,并開具13%的增-值-稅-發-票。

    外地客戶統一采用快遞發貨,也支持上門提貨,貨物快遞到您手時候,一定要開箱檢驗!如有損壞,請拒絕簽收,并由快遞公司返回!

    在你簽收后表示你對該貨物沒有異議!我們會給予您檢測時間,并請在貨物到給予確認,謝謝合作!

    產品均為密封包裝,外包裝詳見產品圖片,白色標簽上均有產品訂貨號和產地,各位買家在收到貨后,請核對型號,無誤后再拆包裝、

    本公司宗旨:本著以誠信為本,以顧客為中心.質量保證·服務誠信·價格實惠.

    為用戶提供專業的自動化產品及服務!

    相關西門子產品技術:




    SIMATIC NET PROFIBUS CP 5711 Released for Delivery

    Entry

     

    Associated product(s)

    The CP 5711 communication processor is herewith release for delivery. Please note: The following approval has not yet been obtained: cULus - The approval and the certif ...

    The CP 5711 communication processor is herewith release for delivery.


    Please note:


    The following approval has not yet been obtained:


    cULus - The approval and the certificate are expected by mid. May 2009.

     

     


    1. Product description


     




     




    The CP 5711 is an innovation of the existing SIMATIC NET CP 5512 for PGs/PCs with USB V2.0 ports. With its USB V2.0 connection, the CP 5711 can be used on many different computer platforms.     


    Innovation of the PG/PC connector technology for USB V2.0:

    The CP 5711 is connected via a USB V2.0 port, allowing flexible use of the module. USB V2.0 is available on many computer platforms and applications for the CP 5711 are therefore manifold. The CP 5711 can also be used on a USB V1.1 port, but the performance will be lower in this case.

     

    Functionally compatible with the CP 5512, as well as PC Adapter USB

    Applications created for the CP 5512 can be used for the CP 5711 without any changes to the configuration or the user software.

    The CP 5711 is functionally compatible with the PC Adapter USB for engineering applications (e.g. STEP7)

     

    + 5 V Power supply from USB V2.0

    The communication processor is supplied with power from the USB port of the PC system.  

     

    +24 V optional external power supply

    The external 24 V power supply covers two application areas:

            - The power supply from the USB V2.0 port is not sufficient (power supply of the PC is too weak; USB ports are not designed for 500 mA USB standard)

            - PROFIBUS Termination is assured even when the USB cable is disconnected (active supply of the PROFIBUS connection termination)


    SIMATIC S7 or SITOP power supplies can be used to provide the external voltage supply.

     

    Mechanical USB latching

    Additional mechanical latching of the included USB connecting cable on the housing of the CP 5711. This safeguards the USB connection in the case of mobile use and also for applications in switchboards.

     

    Diagnostic information via LEDs

    Five LEDs are available on the CP 5711 communication processor to provide extensive diagnostics (power USB, power external, identify, Link/SF and Activity.

        - Power USB = module is supplied with 5 V from the USB port

        - Power Ext = module is supplied with 24 V from an external source

        - Identify = USB identification phase - startup phase of the module

        - Link/System Fault = two-colored LED (green/red) providing the user with status information:

                            - the LED lights up green when subscribers are identified on the connected PROFIBUS network (Link Status).

                            - the LED lights up red if an error occurs on the CP 5711.

    - Activity = the module has synchronized itself on the PROFIBUS network and the PROFIBUS token is available on the PROFIBUS network.  

     

    Mounting on a mounting rail (with optional accessories)

    A separate mounting bracket is available for use of the CP 5711 in switchboards and mounting on 35 mm standard rails.

     


    The existing CP 5512 module with Cardbus technology will continue to be sold in parallel with the CP 5711. Our customers thus have flexibility and can decide freely whether they wish to use a vacant Cardbus slot, or a USB port to operate the relevant SIMATIC NET communication processor. An additional area of application are PC-based systems with no separate card slot and only USB ports.


     


     


    2. Ordering data


     


    Product Name Order No. Remark

    CP 5711 6GK1571-1AA00 CP 5711 Hardware, operating instructions, USB cable

    CP 5711 + MPI cable 6GK1571-1AM00 CP 5711 Hardware, operating instructions, USB cable, 5 m MPI cable

    Mounting rail bracket for CP 5711 6GK1571-1AA00-0AH0  

     


     


    3. Target applications


     


    Target applications for the SIMATIC NET CP 5711 are service and engineering (e.g. with STEP 7 for plant commissioning). Other options include customer applications (e.g. HMI, SCADA, PC-based controllers, etc.) on PC systems with a USB port.


     


     


    Application area:


    - STEP 7 with V5.4 SP 5


    - WinCC


    - WinCC Flexible 


    - Micro/WIN


    - SOFTNET-DP with Version 7.1 + SP1


    - SOFTNET-S7 with Version 7.1 + SP1


    - SOFTNET DP Slave with Version 7.1 + SP1


     

    免責聲明:線纜網轉載作品均注明出處,本網未注明出處和轉載的,是出于傳遞更多信息之目的,并不意味 著贊同其觀點或證實其內容的真實性。如轉載作品侵犯作者署名權,或有其他諸如版權、肖像權、知識產權等方面的傷害,并非本網故意為之,在接到相關權利人通知后將立即加以更正。聯系電話:0571-87774297。
0571-87774297  
主站蜘蛛池模板: 一级午夜免费视频| 亚洲av无码精品色午夜果冻不卡| 一级特黄aaa大片免费看| 日韩欧美在线看| 亚洲成av人片在线观看无码| 男人j桶进女人免费视频| 国产成人综合在线观看网站| 中文字幕乱码人妻一区二区三区 | 国产亚洲综合一区二区在线| a毛片在线看片免费| 最新69国产成人精品视频69| 亚洲最大成人网色香蕉| 特黄AAAAAAAAA毛片免费视频| 国产偷v国产偷v国产| 国产成人精品啪免费视频| 天天综合天天射| 久久夜色精品国产噜噜亚洲AV| 波多野结衣大片| 国产一级黄毛片| 高清在线精品一区二区| 国产极品美女到高潮| 99精品视频观看| 天天躁日日躁成人字幕aⅴ| 一区二区三区四区视频在线 | 日韩精品一区二区三区在线观看l| 人人妻人人澡人人爽欧美一区双 | 狠狠综合久久综合88亚洲| 免费日产乱码卡一卡| 麻豆国产高清精品国在线| 国产真实乱对白mp4| 无遮挡很爽很污很黄在线网站| 少妇高潮喷水久久久久久久久久| 乱之荡艳岳目录| 欧美a级片在线观看| 亚洲色图.com| 狠狠色综合久久婷婷色天使| 免费a在线观看播放| 蕾丝av无码专区在线观看| 国产免费啪嗒啪嗒视频看看| 香蕉精品视频在线观看| 国产精品自在线拍国产手机版 |