G2-GC10-T3505機器人系統集成商
    發布者:lingliang  發布時間:2023-02-04 15:55:30  訪問次數:229

            Integration Time I= 5 to 13000 Integration time (μs) in free run or external triggered mode Trigger mode M= 1 2 3 4 Free run with integration time setting (see Figure 8-1) External trigger with integration time setting (see Figure 8-2) Trigger and Integration time controlled (see Figure 8-3) Trigger and integration time controlled by two inputs (see Figure 8-4) Even data Offset(6) O= 0 to 15 Even Offset setting from 0 to approx. 200 LSB Odd data Offset(6) P= 0 to 15 Odd Offset setting from 0 to approx. 200 LSB Special commands != 0 1 2 3 4 5 Camera identification readout User camera identification readout Software version readout Camera configuration readout Current camera configuration record Default camera configuration restoration User camera ID $= String of Char. Writing and record of the user camera identification

            Synchronization Mode Four different modes may be defined under user control. The TRIG1 and TRIG2 signals may be used to trigger external events and to control the integration time. The Master clock is either external or internal clock. 8.1.1 Free Run Mode with Integration Time Setting The integration and readout periods start automatically and immediately after the previous period. The read-out time depends on pixel number and pixel rate. Note: 1. The integration time is set by the serial line and should be higher than the read-out time (otherwise it is adjusted to the readout time). 

           Figure 8-1. Timing Diagram 8.1.2 Triggered Mode with Integration Time Setting The integration period starts immediately after the rising edge of TRIG1 input signal. The Integration time is set by the serial line. This integration period is immediately followed by a readout period. The read-out time depends on pixel number and the pixel rate. Table 8-1. Free Run Mode with Integration Time Setting Label Description Min Typ Max ti Integration time duration (1) – 13 ms tg Consecutive integration period gap (at maximum frequency) – 6 μs – tt Integration period stop to read-out start delay – 1 μs – Integration N Readout N-1 Readout N Integration N+1 tt ti tg Table 8-2. Triggered Mode with Integration Time Setting Label Description Min Typ Max ti Integration time duration 5 μs – 13 ms td TRIG1 rising to integration period start delay – 5.5 μs –

          Trigger and Integration Time Controlled by One Input The integration period starts immediately after the falling edge of TRIG1 input signal, stops immediately after the rising edge of TRIG1 input signal, and is immediately followed by a readout period. The readout time depends on pixel number and pixel rate. Figure 8-3. Timing Diagram 8.1.4 Trigger and Integration Time Controlled by Two Inputs TRIG2 rising edge start the integration period. TRIG1 rising edge stop the integration period. This period is immediately followed by a readout period. tt Integration period stop to read-out start delay – 1 μs – ts Integration period stop to TRIG1 rising set-up time 4 μs – – th TRIG1 hold time (pulse high duration) 1 μs – – Table 8-2. Triggered Mode with Integration Time Setting (Continued) Label Description Min Typ Max Integration N Integration N+1 Readout N TRIG1 td ts th tt ti Table 8-3. Trigger and Integration Time Controlled by One Input Label Description Min Typ Max ti Integration time duration 5 μs – – td1 TRIG1 falling to integration period start delay – 100 ns – td2 TRIG1 rising to integration period stop delay – 1.3 μs – tt Integration period stop to read-out start delay – 1 μs – th TRIG1 hold time (pulse high duration) 1 μs – –

    免責聲明:線纜網轉載作品均注明出處,本網未注明出處和轉載的,是出于傳遞更多信息之目的,并不意味 著贊同其觀點或證實其內容的真實性。如轉載作品侵犯作者署名權,或有其他諸如版權、肖像權、知識產權等方面的傷害,并非本網故意為之,在接到相關權利人通知后將立即加以更正。聯系電話:0571-87774297。
0571-87774297  
主站蜘蛛池模板: 有色视频在线观看免费高清在线直播| 亚洲欧美在线观看一区二区| 亚洲经典在线中文字幕| 亚洲av无码国产一区二区三区| 丰满少妇被猛男猛烈进入久久| 99视频精品全部在线| 黄色国产免费观看| 男人女人做30分爽爽视频| 最近中文字幕mv手机免费高清 | 国产精品公开免费视频| 国产三级日产三级韩国三级| 亚洲精品无码专区在线| 久久99精品国产免费观看| 91高端极品外围在线观看| 草莓app下载2019年| 毛片女人十八以上观看| 日本三级高清电影全部| 国产综合色在线视频区| 国产一区二区三区在线看| 亚洲娇小性xxxx| 一级成人a做片免费| 黑人精品videos亚洲人| 永久免费看bbb| 成人性一级视频在线观看| 国产福利在线导航| 亚洲视频在线观看不卡| 久久久受www免费人成| 18禁免费无码无遮挡不卡网站| 精品人妻少妇一区二区三区在线| 晚上看b站直播软件| 在线免费观看一级毛片| 另类ts人妖一区二区三区| 久久精品无码一区二区www| 91精品欧美综合在线观看| 精品国产夜色在线| 窈窕淑女韩国在线看| 欧美精品色视频| 性色AV一区二区三区夜夜嗨| 国产日韩精品一区二区三区在线 | 国产香蕉在线视频一级毛片| 又大又硬又爽又深免费看|