聯系人：張經理 13933002678

 五一牌手拉葫蘆展現光滑對手拉葫蘆的工作及壽數有極為重要的影響，光滑脂由基礎油、增稠劑及添加劑制成，不一樣品種和同一品種不一樣商標的光滑脂功能相差很大，旋轉極限不一樣，在挑選時必須注意。原則上，牌子不一樣的光滑脂不能混合，并且，即使是同種增稠劑的光滑脂，也會因添加劑不一樣相互帶來壞影響。
May the player hoist show work and life smooth pull opponents hoist has the extremely important influence, the grease from the base oil, thickening agent and additive, not as smooth as the function of lipid species and the same species were not the same as the trademark is big, the rotational limit is not the same, must pay attention to in choosing the time. In principle, different brands of smooth greases do not mix, and even smooth greases of the same thickener can cause bad effects on each other because of additives.

 五一牌手拉葫蘆在煤礦領域中的應用也十分的廣泛的，那么在煤礦中使用時需注意哪些事項呢？下面我們就告訴大家在煤礦中使用手拉葫蘆應注意什么。一、起吊時要根據物件的形狀和噸位選擇起吊方式。物件的形狀不規則，這應該進行捆綁后起吊。二、工作中凡涉及現場起吊時，施工單位必須根據具體環境制定專項起吊措施或在措施中做專項規定。三、手拉葫蘆起吊前要專人檢查起吊工具，手拉葫蘆的齒輪、摩擦片等完好無銹蝕，主鏈及小鏈無變形無銹蝕，運轉靈活，護罩齊全緊固，自鎖性能好，鉤子完好，銷軸牢靠。四、起吊時必須選用卸扣、錨鏈、鋼絲繩套等專用起吊索具進行起吊。用鋼絲繩套做索具時，插接長度或卡接長度要符合規定，繩套的安全系數不得小于6倍。索具使用前要仔細檢查，保證其完好五、手拉葫蘆不得采用永久支護的錨桿、錨索、鋼帶、金屬網作為起吊點。六、工作前起吊負責人要認真檢查工作現場及周圍環境情況，臟雜物要清理干凈，影響起吊的物件要運走。
"51" player "pull gourd" in the field of coal mine application is also very extensive, so in the use of coal mine should pay attention to what matters? Here we tell you in the coal mine using the hand chain hoist should pay attention to what?. When lifting, choose lifting mode according to the shape and tonnage of the object. The shape of the object is irregular. This should be lifted after binding. Two, the work involved in the lifting of the scene, the construction unit must be based on specific circumstances to develop special lifting measures, or in the measures to make special provisions. Person to check the lifting tool three, chainhoists lifting, hand chain hoist gear, friction plate intact without corrosion, no deformation and no corrosion backbone chain, flexible operation, complete shield fastening, good self-locking performance, hook pin firmly intact. Four, must use the lifting shackle, chain, wire rope and other special lifting sling for lifting. When a wire rope is used for rigging, the length of insertion or clamping shall be in accordance with the regulations, and the safety factor of the rope sleeve shall not be less than 6 times. Before using, the rigging should be checked carefully to ensure its integrity. Five, the hand chain hoist shall not use permanent anchor bolts, anchor cables, steel strips and metal mesh as lifting points. Six, before work, the lifting of the responsible person should carefully check the work site and the surrounding environment, dirty debris to clean up, the impact of lifting objects to be removed.