石家莊倉粒能源科技有限公司

聯系人 陳工 17603290771

TLA型噴射器安裝，操作和維護手冊（E500.2）

串聯噴射器安裝，操作和維護手冊（700-20-A）

尺寸表：

串聯噴射器應用尺寸（E300.1）

TLA噴射器應用尺寸（E300.2）

Eductors, Jet Pumps, Injectors, Ejectors, Tank Mixing, and Blending

噴射器，噴射泵，噴射器，噴射器，儲罐混合和混合

Jacoby-Tarbox® Eductors deliver a great value for your investment. Their advanced design provides superior flow paths for optimum performance, while the rugged construction is your assurance of reliability in demanding applications. Experienced applications personnel and flexible manufacturing capability enable Jacoby-Tarbox to meet tight delivery schedules without expedited manufacturing charges.

Jacoby-Tarbox®噴射器為您的投資帶來巨大價值。 其先進的設計提供了卓越的流路，可實現性能，而堅固的結構則是您在苛刻應用中可靠性的保證。 經驗豐富的應用人員和靈活的制造能力使Jacoby-Tarbox能夠滿足緊張的交貨時間表，而無需增加制造費用

In-Line Eductors

• Decrease maintenance cost – No moving parts
• Use less energy – Venturi-based pumping of liquids, gases, and even solids
• Also known as Jet Pump, Injector, Ejector, Jet Syphon, Steam Syphon, Venturi Pump

In-Tank Eductors

• Use less energy – More efficient than nozzles alone, to mix, blend, suspend solids and heat
• Decrease maintenance cost – No moving parts
• Smaller pump required – Amplifies pump capabilities
• Heat more quietly and efficiently than sparging

串聯噴射器

• 降低維護成本–無活動部件
• 使用更少的能量–基于文丘里管的液體，氣體甚至固體的泵送
• 也稱為噴射泵，噴射器，噴射器，噴射彎管，蒸汽彎管，文丘里泵

罐內噴射器

• 使用更少的能量–比單獨使用噴嘴更有效，可以混合，混合，懸浮固體和加熱
• 降低維護成本–無活動部件
• 需要更小的泵–增強泵的能力
• 比噴射更安靜，更有效地加熱

In-Line Eductors串聯噴射器

Superior By Every Measure

The Clark-Reliance Corporation, with its Jerguson® / Jacoby-Tarbox® Eductors (JRG/JT), delivers greater value for your investment on every count.  Their advanced design provides superior flow paths for optimum performance, while the rugged construction is your assurance of reliability on demanding applications.  They are backed by superior application engineering services, and can be supplied to meet tight delivery schedules.  In addition, they are offered at prices equal to or lower than other makers of eductors, or conventional electric pumps.

各項措施均出眾

Clark-Reliance公司及其Jerguson®/Jacoby-Tarbox®噴射器（JRG / JT）為您的每項投資提供更大的價值。 其先進的設計提供了卓越的流路，可實現性能，而堅固的結構則是您在苛刻應用中可靠性的保證。 它們以優質的應用工程服務為后盾，可以提供以滿足嚴格的交貨時間表。 此外，它們的價格等于或低于其他噴射器或傳統電動泵制造商的價格。

Advanced Design…Full ASME Ratings

JRG/JT Eductors feature an advanced design to assure flows better than those of other eductors. Unlike typical cast units, which meet only a nominal pressure rating, JRG/JT Eductors meet rigorous ASME specifications. All of our eductors have a smooth specified finish for critical flow paths. In comparison, sections of the flow paths in competitive cast units may be left rough to keep production costs down. Also, the mixing tube section of JRG/JT Eductors has been designed to withstand the stress to which it will be subjected . This is the point at which many other makes are weak and subject to breakage during installation. All units have wrench flats to prevent damage during installation. Providing a smooth flow path is critical to optimum eductor performance. As a result of this feature, the motive fluid achieves more velocity through the eductor body, and this means more energy is used for pick-up of the suction fluid. Also, better flow paths in the diverging section of the e ductor allow it to achieve better discharge pressures.

先進的設計…完整的ASME等級

JRG / JT噴射器具有先進的設計，可確保流量比其他噴射器更好。與僅滿足額定壓力等級的典型鑄造設備不同，JRG / JT噴射器符合嚴格的ASME規范。我們所有噴射器的關鍵流道均具有的光滑表面。相比之下，競爭性鑄造機組中的流路部分可能會比??較粗糙，以降低生產成本。同樣，JRG / JT噴射器的混合管部分設計為可承受其應力。在這一點上，許多其他品牌的產品很弱，并且在安裝過程中容易損壞。所有單元都有扳手平面，以防止在安裝過程中損壞。提供平滑的流路對于噴射器性能至關重要。由于此功能，動力流體可通過噴射器主體達到更高的速度，這意味著將更多的能量用于抽吸流體。同樣，在導管的發散部分中更好的流動路徑可以使其獲得更好的排出壓力