鋼性包裝PP料
鋼性包裝PP料
產品價格:¥電儀(人民幣)
  • 規格:25KG
  • 發貨地:東莞
  • 品牌:
  • 最小起訂量:1KG
  • 誠信商家
    會員級別:標準會員
    認證類型:企業認證
    企業證件:通過認證

    商鋪名稱:東莞市廣業塑膠原料有限公司

    聯系人:鄧文校(先生)

    聯系手機:

    固定電話:

    企業郵箱:1801260475@qq.com

    聯系地址:東莞市樟木頭鎮塑料商務中心

    郵編:518000

    聯系我時,請說是在線纜網上看到的,謝謝!

    商品詳情


      鋼性包裝PP,價格合理,誠信經營,可全國供貨(廣東省內免費送上門)。支持物流,快遞和貨運;支持現金,銀行轉賬交易。

      東莞市廣業塑膠原料有限公司專業銷售原裝進口塑膠原料,原廠原包,假一賠十,本司貨源穩定充足,發貨準時,交期和質量均有保障!是專業塑膠原料供應商!!!可提供COA,SMDS,SGS,COC,UL黃卡和物性表及加工參數。


      鋼性包裝PP特性:   

      鋼性包裝PP                                    

      鋼性包裝PP

      鋼性包裝PP

      鋼性包裝PP

      鋼性包裝PP                                                                 

      鋼性包裝PP

      PP1709合約開盤7850/噸,最高7924/噸,最低至7801/噸,收于7849/噸,漲4,日漲幅0.05%。成交量減少至35.13萬手,持倉量增加17908手至64.42萬手。

      消息面:1、紹興三圓PP粒:拉絲T30S7950,膜料F280F7980,注塑Y16SY7950,纖維Y26SY7900。(單位:元/噸)老裝置紹興三圓(20萬噸/)停車中,目前暫未開單;新裝置紹興三錦(30萬噸/)627日停車檢修,今日起正常開單,為期三天。

      原料價格:日本石腦油CF日本報424.25/噸,漲1.5;石腦油FOB新加坡報45.64美元/桶,漲0.12。乙烯CFR東北亞930美元/噸,持平;CFR東南亞報850美元/噸,持平。丙烯中國到岸價875美元/噸,持平。山東丙烯價格報6525/噸,持平。

      現貨價格:國外現貨市場價格小幅下跌,遠東地區報969美元/噸,跌6,中國到岸價報969美元/噸,跌6。國內市場價格基本持平;華東寧波7950/噸,持平;華南茂名報8000/噸,持平。

      觀點總結:裝置檢修逐步復工,下游對后市供應增加預期影響,需求積極性減弱,限制期價上行動力,預計短期維持區間震蕩。技術上,PP1709合約震蕩調整,期價下方測試7650附近支撐,期價上方測試7900附近壓力,預計期價維持在7650-7900區間震蕩,建議區間交易。

      鋼性包裝PP

      Polypropylene through toughening, filling, strengthening, blending and other modified methods can be different properties of the material, in the car

      The modified polypropylene material has been widely used.

      This article describes the use of polypropylene materials in typical parts of the interior.

      1 dashboards Currently used dashboards can be divided into hard dashboards and semi-rigid dashboards.

      In the high-end cars more semi-rigid dashboard. As a semi-rigid dashboard skeleton and duct material, different models, different designs can have a variety of materials to choose, long glass fiber 20% reinforced polypropylene PPLGF20 because of its good rigidity should be a very good choice.

      Most of the middle and low stalls using hard dashboard. Hard dashboard is composed of two parts, can be divided into dashboard body, dashboard body and skeleton of the three parts. As the PP / EPDM-T20 has good toughness and a certain degree of rigidity, so the instrument board and the lower body of the first choice of materials. Of course, dashboard material can also be used PP / EPDM.T10 or PP / EPDM-T15.

      Glove box outside the board material can also be used PP / EPDM.T20, the inner plate material can be used PP-T20 or PP-T30.

      The materials available for the door material are PP / EPDM.T10, PP / EPDM.T15, PP / EPDM-T20.

      Above only talk about the automotive interior in the polypropylene material in some typical parts on the application, there are many other parts used in the interior of polypropylene materials, such as PP-GF20 or PP-GF30 and so on. The typical application mentioned above is only an example, of course, can also use other types of polypropylene material.

      Talked so much PP in the interior of the classic application, then the interior of the car for the requirements of PP material which? We look at.

      Second, the interior parts with PP material requirements

      Polypropylene through a variety of modification, the performance of completely different materials to meet the performance requirements of various parts. With the car gradually into people's daily life, it is getting closer and closer, more and more, both from the visual, tactile or smell, people have more and more demanding. In order to create a more comfortable, beautiful car interior environment, this article as the interior material PP put forward some other requirements.

      Note: Each part is required to have different mechanical properties due to its different use position, different load levels, and different functions. The same material is applied to different parts. For example, the same PP / EPDM.T20 applied to different parts, the bending modulus and impact toughness will have completely different requirements. Therefore, this paper does not describe the mechanical properties of the material.

      1 scratch resistance requirements

      Car interior parts of the raw material PP is relatively high hardness, so the user's use of the process, some parts are easy to be scratched, scratched or kicked, over time, parts of the surface was pale, very ugly. So the PP material must have scratch-resistant properties.

      Specific requirements:

      Under the action of a certain load, with the provisions of the knife, the vertical cross in the sample surface of the 20 strokes, and then evaluate the brightness of the location changes. Usually requires no change in brightness of more than 1.5, that is △ L ≤ 1.5. Commonly used loads are 5N and 10N, depending on the part of the use of parts or paint to choose a different load.

      2 anti-white mark performance

      PP material of the decorative parts in the assembly or by bending, shock and other external forces, often appear white phenomenon, and with the passage of time, white marks will be further expanded, affecting the beauty of the interior. This is what we usually say that the phenomenon of stress whitening. In order to avoid stress whitening, PP material must also have anti-stress whitening performance.

      Specific requirements:

      At a certain height, the sample is subjected to a falling ball impact test, and then the brightness change is evaluated and recorded. After a period of time, once again evaluate the impact of the impact of changes in parts; and then the sample stored at high temperature, after a specified time to re-evaluate the sample brightness changes.

      3 heat aging performance

      Polypropylene material due to its own structure, it is easy to be oxygen in the air oxidation, especially by the role of light and heat, it will accelerate aging, and thus destroyed its physical and mechanical properties. Affecting the life of the parts. So PP material must have the performance of heat and oxygen aging. As an interior parts, at least to meet the conditions of 150 ℃ 400 hours without powder phenomenon. Experiments can be done with the entire part, or by cutting the part into a spline and in a dry box.

      4 distribution performance

      People on the car interior air quality requirements are getting higher and higher, the state immediately to the introduction of automotive interior air quality requirements and other relevant standards. So in order to ensure a good car interior environment, as an interior parts, without exception, must meet the four requirements of the distribution performance. Interior parts distribution performance, including odor test, formaldehyde content determination, condensation components, total carbon emissions.

      如需了解更多關于鋼性包裝PP 的詳細信息,歡迎致電聯系。


      零風險購貨10天無理由退換貨

      為了更好的服務客戶,我公司現推出零風險采購方案,你在我公司購買的貨物只要發貨后10天內。你對貨物有任何不滿意都可以提出退換申請,在貨物未拆封,不影響二次銷售的情況下,我司將給你辦理退換手續并承擔運費,為你免去任何擔憂。

      鋼性包裝PP

       

       

       


    在線詢盤/留言
  • 0571-87774297  
    主站蜘蛛池模板: 男人一边吃奶一边做边爱| 精品一区二区视频在线观看| 成人国产一区二区三区| 久久综合香蕉国产蜜臀av| 欧美日韩国产一区二区| 伊人色综合九久久天天蜜桃| 美女扒开尿眼让男人桶爽视频| 国产又爽又黄又无遮挡的激情视频 | 最新国产小视频在线播放| 亚洲欧美性另类春色| 狼群影院www| 内射少妇一区27P| 美妇与子伦亲小说| 国产免费一区二区三区在线观看| 欧美深夜福利视频| 国产精品成人久久久| 97成人在线视频| 大学生男男澡堂69gaysex| xxxx中文字幕| 很污很黄的网站| 中文字幕av无码专区第一页| 日本三级韩国三级三级a级按摩 | 小蝌蚪视频在线观看www| 中文字幕乱伦视频| 无码少妇一区二区三区芒果| 久久午夜电影网| 日韩在线视频二区| 久久综合狠狠综合久久97色| 极品美女a∨片在线看| 亚洲中文字幕无码中文字在线| 欧美成人免费全部观看在线看| 亚洲欧美日韩中文在线| 毛片免费在线观看| 亚洲精品成人网久久久久久| 狂野黑人性猛交xxxxxx| 伊人久久大香线蕉综合影院首页| 精品亚洲成a人在线观看| 北岛玲亚洲一区在线观看| 精品成人一区二区三区免费视频| 哒哒哒免费视频观看在线www| 老板轻点好痛好涨嗯啊视频|