光纖激光打標（雕刻）機系列Fiber Laser Marking (Sculpture) Machine Series

優勢

1.      優異的光束質量：LJK-FB系列光纖激光打標機光束質量比傳統的固體激光打標機好，為基模（TEMOO）輸出，聚集光斑直徑8um，發散角是半導體泵浦激光器的1/4，特別適用于精密、精細打標。

2.      鐳雕效果好：徹底顛覆打標機不能把氧化鋁直接鐳雕成表面黑色的說法----能快速把氧化鋁產品鐳雕出絲印一樣美觀的表面純黑色，不需要添加任何藥水等輔助材料。

3.      使用成本低廉：電光轉換效率最高達到30%，整機耗電不到500W，是燈泵浦固體激光打標機的1/10，大大節省能耗支出。

4.      免維護操作：激光器無需進行任何維護，也不用調整或清潔鏡片。

5.      使用壽命長：使用激光二極管作為泵浦源，其平均工作時間可達100000小時。

6.      加工速度快：加工速度是傳統激光打標機的2-10倍。

ADVANTAGES

1.    Excellent beam quality: The beam quality of the LJK-FB series fiber laser marking machine is better than that of the traditional solid-state laser marking machine. It is the output of the fundamental mode (TEMOO). The concentrated spot diameter is 8um, and the divergence angle is 1/4 of that of semiconductor-pumped laser. It is especially suitable for precision and fine marking.

2.    Good laser engraving effect: It completely overturns the notion that the marking machine cannot carve alumina oxide directly into black surface - it can quickly carve alumina products into pure black surface as beautiful as screen printing, without adding any auxiliary materials such as medicines.

3.    Low cost and low power consumption.

4.    Maintenance-free: The laser does not require any maintenance and does not require adjustment or cleaning of the lens.

5.    Long service life: Using a laser diode as the pump source, the average working time is up to 100,000 hours.

6.    High marking speed: The processing speed is 2-10 times that of the traditional laser marking machine.