GJQ－105 電離式火焰監測器主要用于燃氣工業燃燒器的火焰監測。檢測性能可靠，可

以排除積炭、布線分布電容的影響，只對火焰敏感，對高溫無反應，具有強抗干擾性能。

················································································································

一、功能：

控制點火裝置自動點火，點火時自動打開燃料閥，在設定時間內沒有點燃，控制器自動關閉

燃料閥并報警，如點火成功則保持燃料正常供應。

·····················································································································

二、主要技術指標

1.電源電壓 220V    ±10%     50/60HZ

2.火焰檢測     電離電極

3.檢測響應時間≤0.2 秒

4.電極使用溫度     長期 1300℃

5.探頭與監測器連接距離     ≤100 米

···························································································································

三、殼體 ABS 工程塑料

1.體積 155×90×55mm、不包括插頭尺寸

2.安裝尺寸 135×52mm 安裝孔Φ4－Φ5 mm

···························································································································

四、檢測電極 pyromax 高溫合金

1.直徑Φ12    伸入火區Φ4

2.安裝螺紋 M14×1.25

3.安裝檢測電極必須能接觸到火焰，檢測孔Φ12.5mm，電極長期工作溫度 1300℃，不需冷卻。