Deltrol Fluid Products 成立于 1963 年，致力于設計和制造直列式輔助液壓和氣動流量限流閥、針形限流閥和止回限流閥。

DELTROL限流閥PC5-3技術規格

DELTROL限流閥PC5-3介紹

描述

Pneu-Trol 壓力補償恒流調節閥在維持恒定流量方面異常精確，適用于高達 3,000 psi（207 bar）的壓力。這些可調閥門在壓力下，允許在流量范圍內獨立于入口壓力變化進行無限的輸出流量調整。內部止回閥可以旁通控制孔，提供無阻礙的自由逆流。

這些閥門的補償作用源于入口端的可調孔和出口端的一系列可變孔。流量通過可變孔由彈簧和活塞控制。這些元件共同作用調節液壓流量在確定的范圍內。流量在 1.5 gpm（5.7 lpm）時的控制精度為±15%，在高達 15.0 gpm（56.8 lpm）的高流量時控制精度為±10%。溫度變化從 60°F（16°C）到 180°F（82°C）幾乎不會影響調節效果。當溫度差 [ΔT] 為 70°F（21°C）時，流量變化大約為 ±2% *大；而當溫度差 [ΔT] 為 120°F（49°C）時，流量變化大約為 ±4% *大。

系列 5 單元采用高強度鋼制造。這些閥門的標準接頭為 NPTF，選定型號還可提供可選的 SAE 和 BSPT 螺紋。

Description

Pneu-Trol pressure compensated constant flow regulator valves are exceptionally accurate in maintaining constant flow with pressures up to 3,000 psi (207 bar). These adjustable valves, while under pressure, allow infinite output flow adjustment within a specified flow range independent of inlet pressure variations. An internal check valve to bypass the control orifice provides unrestricted free reverse flow.

The compensating action of these valves results from an adjustable orifice at the inlet end and a series of variable orifices at the outlet end. Flow through the variable orifices is controlled by a spring and piston. These elements work together to regulate hydraulic flow within the determined rates. Flows are controlled within ±15% up to 1.5 gpm (5.7 lpm) and ±10% at higher flow up to 15.0 gpm (56.8 lpm). Regulation is virtually unaffected by temperature changes from 60° F (16° C) to 180° F (82° C). At a temperature differential [ΔT] of 70° F (21° C) flow variation would be approximately ±2% max; while at temperature differential [ΔT] of 120° F (49° C) the flow variation would be approximately ±4% max.

Series 5 units are made from high-strength steel. The standard porting of these valves is NPTF with optional SAE and BSPT threads available on selected models.

DELTROL限流閥其他常用型號：

DELTROL PC5-2

DELTROL PCB5-2

DELTROL PC5-3

DELTROL PCB5-3

DELTROL PC5-4

DELTROL PCB5-4

DELTROL PCM85-3

DELTROL PCM85-4

DELTROL valve NEW + ORIGINAL+ ONE YEAR WARRANTY

愛澤工業成立于2010年，定位于向制造工業提供高端制造技術和設備。代理經營世界優質的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。

如果有任何關于DELTROL限流閥PC5-3的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。

DELTROL限流閥PC5-3技術參數及介紹