商品詳情

SM 332 模擬量輸出模塊

訂貨數據
附件
產品信息
組態工具

跳轉到

概述

應用

功能

技術規范

更多信息

概述

模擬量輸出
用于連接模擬量執行器

應用

模擬量輸出模塊用于從PLC向過程變量輸出模擬量信號。適用于連接模擬量執行器。

功能

模擬量輸出模塊將控制器的數字信號轉換成過程所需的模擬量信號（電流或電壓）。

該模塊具有如下特點：

分辨率：12 ~ 15 位
多種電壓和電流范圍：
使用參數賦值軟件可以對每個通道進行單獨的量程設置。
中斷能力：
出現錯誤時，模塊將診斷中斷發送到控制器的 CPU。
診斷：
該模塊將綜合診斷信息發送到 CPU。

技術規范

Article number	6ES7332-5HB01-0AB0	6ES7332-5HD01-0AB0	6ES7332-5HF00-0AB0	6ES7332-7ND02-0AB0
	SIMATIC S7-300, ANALOG OUTPUT	SIMATIC S7-300, ANALOG OUTPUT	SIMATIC S7-300, ANALOG OUTPUT	SIMATIC S7,SM 332 ANALOG OUTPUT
Supply voltage
Load voltage L+
● Rated value (DC)	24 V	24 V	24 V	24 V
● Reverse polarity protection	Yes	Yes	Yes	Yes
Input current
from load voltage L+ (without load), max.	135 mA	240 mA	340 mA	290 mA
from backplane bus 5 V DC, max.	60 mA	60 mA	100 mA	120 mA
Power loss
Power loss, typ.	3 W	3 W	6 W	3 W
Analog outputs
Number of analog outputs	2	4	8	4; Isochronous mode
Voltage output, short-circuit protection	Yes	Yes	Yes	Yes
Voltage output, short-circuit current, max.	25 mA	25 mA	25 mA	40 mA
Current output, no-load voltage, max.	18 V	18 V	18 V	18 V
Output ranges, voltage
● 0 to 10 V	Yes	Yes	Yes	Yes
● 1 V to 5 V	Yes	Yes	Yes	Yes
● -10 V to +10 V	Yes	Yes	Yes	Yes
Output ranges, current
● 0 to 20 mA	Yes	Yes	Yes	Yes
● -20 mA to +20 mA	Yes	Yes	Yes	Yes
● 4 mA to 20 mA	Yes	Yes	Yes	Yes
Load impedance (in rated range of output)
● with voltage outputs, min.	1 k?	1 k?	1 k?	1 k?
● with voltage outputs, capacitive load, max.	1 μF	1 μF	1 μF	1 μF
● with current outputs, max.	500 ?	500 ?	500 ?	500 ?
● with current outputs, inductive load, max.	10 mH	10 mH	10 mH	1 mH
Cable length
● shielded, max.	200 m	200 m	200 m	200 m
Analog value generation for the outputs
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max.	12 bit; ±10 V, ±20 mA, 4 mA to 20 mA, 1 V to 5 V: 11 bit + sign; 0 V to 10 V, 0 mA to 20 mA: 12 bit	12 bit; ±10 V, ±20 mA, 4 mA to 20 mA, 1 V to 5 V: 11 bit + sign; 0 V to 10 V, 0 mA to 20 mA: 12 bit	12 bit; ±10 V, ±20 mA, 4 mA to 20 mA, 1 V to 5 V: 11 bit + sign; 0 V to 10 V, 0 mA to 20 mA: 12 bit	16 bit
● Conversion time (per channel)	0.8 ms	0.8 ms	0.8 ms	200 μs; in isochronous mode 640 μs
Settling time
● for resistive load	0.2 ms	0.2 ms	0.2 ms	0.2 ms
● for capacitive load	3.3 ms	3.3 ms	3.3 ms	3.3 ms
● for inductive load	0.5 ms; 0.5 ms (1 mH); 3.3 ms (10 mH)	0.5 ms; 0.5 ms (1 mH); 3.3 ms (10 mH)	0.5 ms; 0.5 ms (1 mH); 3.3 ms (10 mH)	0.5 ms
Errors/accuracies
Operational error limit in overall temperature range
● Voltage, relative to output range, (+/-)	0.5 %	0.5 %	0.5 %	0.12 %
● Current, relative to output range, (+/-)	0.6 %	0.6 %	0.6 %	0.18 %
Basic error limit (operational limit at 25 °C)
● Voltage, relative to output range, (+/-)	0.4 %	0.4 %	0.4 %	0.02 %
● Current, relative to output range, (+/-)	0.5 %	0.5 %	0.5 %	0.02 %
Interrupts/diagnostics/status information
Diagnostic functions	Yes; Parameterizable	Yes; Parameterizable	Yes; Parameterizable	Yes; Parameterizable
Substitute values connectable	Yes; Parameterizable	Yes; Parameterizable	Yes; Parameterizable	Yes; Parameterizable
Alarms
● Diagnostic alarm	Yes; Parameterizable	Yes; Parameterizable	Yes; Parameterizable	Yes; Parameterizable
Diagnostic messages
● Diagnostic information readable	Yes	Yes	Yes	Yes
Diagnostics indication LED
● Group error SF (red)	Yes	Yes	Yes	Yes
Potential separation
Potential separation analog outputs
● between the channels and backplane bus	Yes	Yes	Yes	Yes
Isolation
Isolation tested with	500 V DC	500 V DC	500 V DC	1500 V DC
Connection method
required front connector	20-pin	20-pin	40-pin	20-pin
Dimensions
Width	40 mm	40 mm	40 mm	40 mm
Height	125 mm	125 mm	125 mm	125 mm
Depth	117 mm	117 mm	117 mm	117 mm
Weights
Weight, approx.	220 g	220 g	272 g	220 g

SM 332 模擬量輸出模塊

跳轉到

概述

應用

功能

技術規范

更多信息

手冊