商鋪名稱：上海頤品自動化科技有限公司
聯系人：張凱文（先生）
聯系手機：
固定電話：
企業郵箱：sales@epin-china.com
聯系地址：上海市金山區山陽鎮浦衛公路16393號5幢346室
郵編：200138
聯系我時，請說是在線纜網上看到的，謝謝！
HAWKE鎧裝防爆格蘭（501/453/UNIV系列）
HAWKE代理商：上海頤品自動化科技有限公司
Hazardous Area Cable Glands from Hawke
Hawke 501/453/Universal cable glands are suitable for use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables. Mainly used with cables that show ‘cold flow’ characteristics.
Hawke 501/453/Universal cable glands are dual certified Exd and Exe and suitable for installation in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC, 3.5-91.6mm outside cable diameters.
When used in increased safety applications the Hawke cable gland can be used to terminate braided cables where the braid and the cable outer sheath enter into the electrical enclosure or junction box.
? Exdb IIC Gb, Exeb IIC Gb, ExnR IIC Gc, Extb IIIC Db Aromoured Cables ATEX & IECEx Cable Gland.
Hawke 501/453/Universal cable gland is suitable for cable termination and installation in Zone 1 (21), Zone 2 (22) and Division 2 hazardous areas.
| Hawke Size Ref. | Entry Thread Size |
Thread Length ‘H’ |
Cable Acceptance Details |
‘G’ Compressed Length |
Hexagon Dimensions | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inner Sheath ‘A’ | Outer Sheath ‘B’ | ‘C’ Armour/Braid | |||||||||||
| Metric | NPT * |
Across Flats |
Across Corners |
||||||||||
| Standard | Option | Min. | Max. | Min. | Max. | Orientation 1 | Orientation 2 | ||||||
| Os | M20 ? | ?” | – | 15 | 3.5 | 8.1 | 5.5 | 12.0 | 0.8 / 1.25 | 0 / 0.8 | 61.6 | 24.0 | 26.5 |
| O | M20 ? | ?” | – | 15 | 6.5 | 11.4 | 9.5 | 16.0 | 0.8 / 1.25 | 0 / 0.8 | 61.6 | 24.0 | 26.5 |
| A | M20 | ?” | ?” | 15 | 8.4 | 14.3 | 12.5 | 20.5 | 0.8 / 1.25 | 0 / 0.8 | 63.0 | 30.0 | 32.5 |
| B | M25 | 1″ | ?” | 15 | 11.1 | 19.7 | 16.9 | 26.0 | 1.25 / 1.6 | 0 / 0.7 | 69.9 | 36.0 | 39.5 |
| C | M32 | 1?” | 1″ | 15 | 17.6 | 26.5 | 22.0 | 33.0 | 1.6 / 2.0 | 0 / 0.7 | 73.2 | 46.0 | 50.5 |
| C2 | M40 | 1?” | 1?” | 15 | 23.1 | 32.5 | 28.0 | 41.0 | 1.6 / 2.0 | 0 / 0.7 | 77.9 | 55.0 | 60.6 |
| D | M50 | 2″ | 1?” | 15 | 28.9 | 44.4/42.3 ? | 36.0 | 52.6 | 1.8 / 2.5 | 0 / 1.0 | 93.5 | 65.0 | 70.8 |
| E | M63 | 2?” | 2″ | 15 | 39.9 | 56.3/54.3 ? | 46.0 | 65.3 | 1.8 / 2.5 | 0 / 1.0 | 94.0 | 80.0 | 88.0 |
| F | M75 | 3″ | 2?” | 15 | 50.5 | 68.2/65.3 ? | 57.0 | 78.0 | 1.8 / 2.5 | 0 / 1.0 | 103.0 | 95.0 | 104.0 |
| G | M80 | 3?” | – | 20 | 67.0 | 73.0 | 75.0 | 89.5 | 2.0 / 3.5 | 0 / 1.0 | 90.6 | 106.4 | 115.0 |
| H | M90 | 3?” | – | 20 | 67.0 | 77.6 | 75.0 | 89.5 | 2.0 / 3.5 | 0 / 1.0 | 90.6 | 115.0 | 130.0 |
| J | M100 | 4″ | – | 20 | 75.0 | 91.6 | 88.0 | 104.5 | 2.5 / 4.0 | 0 / 1.0 | 90.6 | 127.0 | 142.0 |
Os – F size metric entry threads are 1.5mm pitch as standard. For G size Cable Glands and above, a 2mm pitch is supplied as standard (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering.
? Smaller value is applicable when selecting reduced NPT entry option.
Sizes Os and O are available with an M16 thread size. For O size with an M16 thread, the maximum cable inner sheath diameter is 10.9mm.
? Cembre cable lugs available to crimp and terminate cable conductors to ensure complete termination of cable.All dimensions in millimetres (except*).
Hawke 501/453/Universal cable glands are manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.
Strip cable to suit equipment as shown above and expose the armour/braid ‘I’.
‘I’ = 20mm for cable gland sizes Os to C ‘I’ = 25mm for cable gland sizes C2 to H & J ‘II’ = to suit equipment.
Push the cable through the armour spigot (4). Spread armour/braid over the armour spigot (4) until the end of the armour/braid is up against the shoulder of the armour cone. Position the armour clamping ring (3).
Remove the inner seal (5) from the entry (6). Place the entry (6) over the armour spigot (4). Move the sub-assembly (1) and (2) up to meet the entry (6). Note: If the equipment has a threaded entry, it may be advisable to screw the entry component into the equipment to prevent twisting of the cable after step D
? Click Hawke Cable Glands to view the complete range of hazardous area glands certified according to ATEX & IECEx for Zone 1 / Zone 2.
Flameproof Exdb and Increased Safety Exeb (Dust Extb) Dual Certified glands from Hawke include – for further information review the product pages or contact us to discuss your cable gland requirements.
Hazardous Area Cable Glands-ATEX IECEX，Exe，Exd Group II
Hawke防爆格蘭代理商：上海頤品自動化科技有限公司（4008552521）
關鍵詞：Hawke防爆格蘭，Hawke防爆變徑，Hawke防爆堵頭，Hawke防爆呼吸閥，Hawke防爆接線盒，Hawke防爆控制箱
Hawke防爆格蘭等產品規格書及相關資料-請咨詢上海頤品自動化科技有限公司
