上海冠佑電氣自動化有限公司隨時歡迎您的來電咨詢，低價現貨供應 。

電話：021-60483978  13916770581

傳真：021-34689102  聯系人：陳尉

商務QQ：1305857511  郵箱：2265736@163.com

網址：www.gyautomation.com

 

Type 10 Pressure Regulator 

高精度

啟動穩定 

重復精度高 壓力穩定

自鎖能力

溫度穩定性 

醫療行業應用的理想選擇

 

Product Detail:

    世界上沒有任何其他廠家的調壓閥能在調壓精度和重復精度上與Bellofram的T10系列調壓閥相媲美。它適合高精度要求場合。 此閥實際上是一個通過導向片和不銹鋼氣囊組成的伺服機構來保證精度的壓力控制器。這個機構最初是為敏感的飛機高度計開發的，這個精密傳感元件提供能量以激活伺服控制機制。它提供了更好的調節精度，并消除了一系列傳統膜片與彈簧遇到的問題。整個測量元件，包括先導部分，是由不銹鋼制成并經過熱處理，以消除在正常工作環境下的遲滯或永久變形。

      Bellofram的T10系列調壓閥輸出精度為0.1%，并且在進氣壓力和流量變化時有非常高的敏感性。旨在消除壓力調整需要經過長期的“間隔時間”。在啟動時，調壓閥的壓力將返回其設置值。由于高增益的氣動伺服放大系統，調壓閥閥可以在大流量變化下特別是從0到12SCFM變化時保持穩定。提供一個排出多余氣體并使調壓閥回到一個較低值的溢流裝置。溢流裝置確保壓力變化時做出快速響應，避免下游壓力降低的情況的發生。壓力穩定依托高性能伺服機構的應用，它使進入到伺服機構內的壓力降低而保持穩定。

Part Numbers: 

   Port Size Control Range

Type Part Number NPT BAR psig

10 960-001-000 1/8 0.1–1.7 2-25

960-003-000 1/4 0.1–1.7 2-25

960-005-000 3/8 0.1–1.7 2-25

960-007-000 1/8 0.1–4.1 3-60

960-009-000 1/4 0.1–4.1 2-60

960-011-000 3/8 0.1–4.1 2-60

960-013-000 1/8 0.1–8.3 2-120

960-015-000 1/4 0.1–8.3 2-120

960-017-000 3/8 0.1–8.3 2-120

10BM 960-126-000 N/A 0.1–1.7 2-25

960-127-000 0.1–4.1 2-60

960-128-000 0.1–8.3 2-120

10HR 960-028-000 1/8 0.1–8.3 2-120

960-029-000 1/4 0.1–8.3 2-120

960-030-000 3/8 0.1–8.3 2-120

10EXHR 960-072-000 1/8 0.1–8.3 2-120

960-073-000 1/4 0.1–8.3 2-120

960-074-000 3/8 0.1–8.3 2-120

10PL 960-019-000 1/8 0.1–1.7 2-25

960-020-000 1/4 0.1–1.7 2-25

960-021-000 3/8 0.1–1.7 2-25

960-022-000 1/8 0.1–4.1 2-60

960-023-000 1/4 0.1–4.1 2-60

960-024-000 3/8 0.1–4.1 2-60

960-025-000 1/8 0.1–8.3 2-120

960-026-000 1/4 0.1–8.3 2-120

960-027-000 3/8 0.1–8.3 2-120

10LR 960-053-000 1/4 0.03–1.7 0.5-25

 

Options:

提供一個防篡改旋鈕，防篡改旋鈕用調整螺絲鎖住，以防止無意或不必要的輸出壓力調節。

T10 調壓閥還提供各種接口, (類似T10BM) 詳情請與我們?nèi)〉寐?lián)系。

 

 

 

 

 

 Type 110

Type 110 Pressure Regulator 

高精度調壓閥

豐富的接口可供選擇– 3/8, 1/2, 3/4 和 1 NPT

(BSPP 和BSPT 也可選擇)

具有自鎖功能

高流量 – 150+ SCFM

高溢流

平衡調壓 

輸出壓力非常穩定

輸出流量非常穩定

 

 

Product Detail:

The Type 110 combines the proven technology of the Marsh Bellofram Type 10 regulator with the large pneumatic booster of the Type 79 Relay. The result is a precise, crisply responding regulator that can achieve very large forward and exhaust flows. Forward to reverse flow offset is minimized by the capsule operated, servo-control system located in the upper portion of the regulator. This servo-control system supplies a pilot pressure to the large integral pneumatic booster. The large supply and exhaust orifices of the integral booster enable this regulator to produce very high forward and exhaust flow rates. Few regulators can offer this combination of sensitivity and large flow capacity.

 

As with all of the Type 10 regulators, the stainless steel measuring capsule is the “heart” of the Type 110 Pressure Regulator. Originally developed for sensitive aircraft altimeters, this precision-sensing element provides the energy to activate the servo-control mechanism. It provides greater regulation and accuracy while eliminating the problems usually encountered with range springs and conventional diaphragms. Because of the balanced supply valve in the integral pneumatic booster, the Type 110 can work with higher supply pressures (250 PSIG) than many other regulators.

 

The Type 110 was developed specifically for use with Air Balancing Systems or Zero-Gravity Arms. Such systems require very small forward to reverse flow offsets for smooth operation. The precision regulators that can achieve the sensitivity requirements do not typically possess the forward or exhaust capacity to handle large balancing arms or cylinders. The Type 110 does not have this limitation. It is ideal for use in any application where precise regulation of pressure is required along with high flow or high exhaust capacity. 

Part Numbers: 

P/N Port Size Pressure Ranges

psig BAR

960-510-000 3/8 NPT 2-25 0.1-1.7

960-511-000 3/8 NPT 2-50 0.1-3.5

960-512-000 3/8 NPT 2-110 0.1-7.6

960-513-000 1/2 NPT 2-25 0.1-1.7

960-514-000 1/2 NPT 2-50 0.1-3.5

960-515-000 1/2 NPT 2-110 0.1-7.6

960-516-000 3/4 NPT 2-25 0.1-1.7

960-517-000 3/4 NPT 2-50 0.1-3.5

960-518-000 3/4 NPT 2-110 0.1-7.6

960-519-000 1 NPT 2-25 0.1-1.7

960-520-000 1 NPT 2-50 0.1-3.5

960-521-000 1 NPT 2-110 0.1-7.6