上海寶山千斤頂 寶山液壓千斤頂 鋼城牌千斤頂 2噸-50噸?

Shanghai baoshan jack Baoshan hydraulic jack Steel city of jack 2 tons to 50 tons
上海寶山是一種采用柱塞或液壓缸作為剛性頂舉件的千斤頂。 簡單起重設備一般只備有起升機構，用以起升重物。構造簡單、重量輕、便于攜帶，移動方便。常用的簡單起重設備有液壓千斤頂、滑車和卷揚機等。
上海寶山千斤頂使用方法：
1、使用前必須檢查千斤頂組件是否正常
2、嚴格遵循千斤頂各參數規定，切勿出現超載使用現象
3、如手動發現油量不足時，應該先進行補足，才能使用
4、千斤頂應該頂在重物的重心位置使用
5、千斤頂將重物頂起以后，應該及時使用支撐物將重物支牢，嚴禁使用千斤頂進行支撐
Lifting weight (T) : 3.2, 6.3, 5, 10, 20 and 32
Lifting height (M) : 6.3, 8, 10, 12.5, 16, 20
Shanghai baoshan is a kind of the plunger or hydraulic cylinder as a rigid jacking of jack. Simple lifting equipment equipped with lifting mechanism only commonly, for lifting heavy objects. Simple structure, light weight, easy to carry, convenient movement. Commonly used simple lifting equipment such as hydraulic jack, block and hoist.
Shanghai baoshan jack method of use:
1, must be checked before use jack component is normal
2, strictly follow jack parameters regulation, do not appear overload phenomenon
3, such as manual found oil shortage, should be first to make up, can use
4. Jack should be used in heavy center of gravity position
After 5, jack will clog up, use should be timely support to weight fast, jack is strictly prohibited to support
Lifting weight (T) : 3.2, 6.3, 5, 10, 20 and 32
Lifting height (M) : 6.3, 8, 10, 12.5, 16, 20

?

上海寶山千斤頂技術圖：

上海寶山千斤頂參數圖：

?售后：

本產品嚴格按國家3包執行，產品質量由中國人民保險公司(PICC)承保，請放心使用。產品自售出之日起，在一年內正常使用狀態下因出現的質量問題保修。
超出保修期的產品（無法維修的產品以例外），本公司負責維修，收取一定的配件成本費。
由于我們公司的產品在不斷更新，產品圖片、參數僅供參考，以實物為準。