JUGITEC BOSCH灌裝線手套 EPDM RABS手套

認準：

顥泰在中國10年只專注手套

JUGITEC - 品牌簡介

JUGITEC是JUNG?GUMMITECHNIK?GmbH公司旗下的橡膠手套系列品牌。JUNG?GUMMITECHNIK?GmbH是一家經過認證的高品質橡膠產品生產商，總部位于萊茵-美因內卡大都會地區。產品組合主要包括軟管，模制零件和防護手套。此類橡膠制品可以承受極壓，負壓，磨損和溫度條件，并暴露于強堿、強酸等腐蝕性介質中。

材料特性

溫度范圍： － 20 ℃ ～＋ 120℃

抗臭氧和抗氣候性

抗多種氧化化學制劑

高氣密性

化學特性

根據DIN EN 374-3:2003

化學試劑 防護指數

A 甲醇 6 gt; 480min）

K 丙酮 6 gt; 480min）

L 40 6 gt; 480min）

機械性能

根據DIN EN 388:2003

耐磨性 防護度2

耐切割性 防護度0

耐撕裂性 防護度1

耐穿刺性 防護度0

全新認證全新標識，CE0299

顥泰專注，全心服務，現貨直銷

特點和優點

?出色的抗磨損性能

?和氧化物

?自然柔軟，舒適

?顥泰商貿干箱手套！

JUGITEC手套7BL04-250F?此款符合FDA

耐磨性能好，抗臭氧和氧化化學品性能好，柔軟舒適，袖口卷邊厚度為4.8mm，可方便與手套箱連接。多次浸漬工藝生產。

Information sheet according to DIN EN 420: General requirements for gloves

Penetration (penetrability) according DIN EN ISO 374-2: 2015: passed

Penetration resistance was assessed under laboratory conditions and applies only to the samples tested.

Degradation according DIN EN ISO 374-4: 2014:

Remark: No visually noticeable changes or degradation on the tested areas of the cuff and palm

Protection against microorganism according DIN EN ISO 374-5: 2017: passed

Glove for protection against bacteria, fungal infection and viruses.

Penetration resistance was assessed under laboratory conditions and applies only to the samples tested.

Mechanical characteristics according DIN EN 388:2017 (European Standard)

Performance level:

The performance levels for the respective pictogram or for the respective test standard are listed, where:

0: indicates that the glove passed the minimum performance level for a given single hazard;

X: indicates that the test is inapplicable due to glove material or glove design for this glove.

Further information on the performance levels can be found in the corresponding valid standard.

The protective gloves comply with the PPE VO (EU) 2016/425.

The EU Declaration of Conformity is available at: www.jung-gt.de and www.jugitec.de.